Como Filtration Systems

800.451.0028

Model 502: Dual High Capacity

Model 502 High Capacity Depth Filtration SystemCOMO designed the Model 502 depth-type oil filtration system for large-capacity reservoir applications where high flow rates are required.

 

The COMO Model 502 offers sub-micron particulate removal using an increased inlet surface area to allow the higher process rates required to use multi-pass filtration on reservoirs in the 1500 to 5000 gallon range.

COMO provides a hoist socket to lift dirty elements from housings, and swing them to the side for easy servicing. When more than one system is in the same plant, only one hoist is needed since it can be easily carried from one unit to another. 

COMO Model 502 specifications:

  • Two powder coated C-1200 filter housings
  • 20, 30, or 40 GPM positive displacement gear pump

The COMO Model 502 can help you solve the following problems:

  • Contaminants in oil
  • Moisture in oil
  • System failure
  • High fluid replacement costs
  • High fluid disposal costs
  • Service outages
  • Strict EPA regulations

The COMO Model 502 standard features include:

  • Pressure gauge to monitor element condition
  • External pressure relief valve
  • Push button motor starter
  • Inlet wye strainer to protect pump
  • Flow regulating loop to adjust flow of high viscosity oils through filter
  • Filter hoist to lift out used elements
  • 230/460 VAC, 60 Hz, TEFC, 1725 RPM motor

Additional options available for the COMO Model 502:

  • Motor in any voltage or phase
  • Alternative pump (centrifugal or air diaphragm)

The COMO Model 502 provides:

  • Quick and continuous oil filtration
  • Ultra-fine contamination control to one micron or finer
  • Water removal of up to five gallons per element
  • Fully automatic operation

The COMO Model 502 filters:

  • Hydraulic oil
  • Lubricating oil
  • Gear Box oil
  • Transformer oil
  • Quench oil
  • Compressor oil
  • Refridgeration oil
  • EDM
  • Vacuum Pump oil
  • Drawing oil
  • Cutting oil